Note that a foldername starting with “.” is an invisible folder on Linux. I opened it in nano to edit it by running “nano ~/.dosbox/”. On Linux, mine was located in “~/.doxbox/” and was called “”. ![]() Now that you have written down the exact name of your serial port (either something like “/dev/ttyUSB0” for Linux/MacOS, or “COM9” for Windows), open the DOSBox configuration file. On MacOS, the process for finding the name of the serial port is basically identical, except that the name of the port is usually a little bit different under MacOS. Past experience on Windows says that sometimes you need to keep plugging into the same USB port to get the same COM port between sessions, but this might just be a permissions thing at work. If you’re using Windows, you’ll need to work out what COM port the device is connected as. Now plug in your USB adapter, and run the same command again… an extra file should have appeared. On Linux, run the command “ls /dev/tty*” – this will list all available terminals (including serial ports). I have one of these, which seems to be marginally better made. I’d advise spending double the money and getting something that will last. There are really cheap ones available, but just to warn you – I’ve been through two of the cheap ones that have a silver cable and blue plugs. If you don’t have a built in serial port (not many people do these days), you’ll need a USB to RS232 adapter. If you’re using a Debian / Ubuntu style setup, you can just type “sudo apt install dosbox” at the command line. On Linux, DOSBox is installed from you packet manager of choice. Note that the original DOS software will no longer natively run on Windows. The following details my experiments in trying to get the DOS version of Smart Move running on a modern Linux computer, although most of the detail should also be applicable to other modern OSes. This is interesting as it goes some way to overcoming the speed limitations of the 9600 baud serial connection. The software appears to load machine code directly into the memory of the Smart Box rather than sending serial commands. The software appears to have been available for a number of platforms (BBC Micro, RISCOS, MacOS and DOS), but I have only seen copies of the DOS software while searching. The Economatics Smart Box serial interface boxes used to come with a program called “Smart Move”. Feedback welcome, but do not rely on this being correct! Using Smart Move on a Modern Computer This page is a DRAFT as I do not currently have the correct hardware to fully test and debug the process. Phipli on Programming a AT28C64 with a TL866ii Plus.Creating a Custom Bootable Classic Mac OS CD from Linux. ![]() Benchmarking Retro Macs : Norton System Info.CD-ROM Images for Booting a Macintosh from a 3rd Party CD-ROM Drive. Creating a Disc Image of a Classic Mac OS Bootable CD.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |